###################### Start of libnfc-nci.conf #######################

###############################################################################
# Application options
APPL_TRACE_LEVEL=0xFF
PROTOCOL_TRACE_LEVEL=0xFFFFFFFF

NFC_DEBUG_ENABLED=0x01

###############################################################################
# File used for NFA storage
NFA_STORAGE="/data/nfc"

###############################################################################
# Force UICC to only listen to the following technology(s).
# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h.
# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B | NFA_TECHNOLOGY_MASK_F
UICC_LISTEN_TECH_MASK=0x07

###############################################################################
# Configure the default Destination Gate used by HCI (the default is 4, which
# is the ETSI loopback gate.
NFA_HCI_DEFAULT_DEST_GATE=0xF0

###############################################################################
# Forcing HOST to listen for a selected protocol
# 0x00 : Disable Host Listen
# 0x01 : Enable Host to Listen (A)  for ISO-DEP tech A
# 0x02 : Enable Host to Listen (B)  for ISO-DEP tech B
# 0x04 : Enable Host to Listen (F)  for T3T Tag Type Protocol tech F
# 0x07 : Enable Host to Listen (ABF)for ISO-DEP tech AB & T3T Tag Type Protocol tech F
HOST_LISTEN_TECH_MASK=0x07

###############################################################################
# Enabling/Disabling Forward functionality
# Disable           0x00
# Enable            0x01
NXP_FWD_FUNCTIONALITY_ENABLE=0x00

###############################################################################
# AID for Empty Select command
# If specified, this AID will be substituted when an Empty SELECT command is
# detected.  The first byte is the length of the AID.  Maximum length is 16.
AID_FOR_EMPTY_SELECT={08:A0:00:00:01:51:00:00:00}

###############################################################################
# When screen is turned off, specify the desired power state of the controller.
# 0: power-off-sleep state; DEFAULT
# 1: full-power state
# 2: screen-off card-emulation (CE4/CE3/CE1 modes are used)
SCREEN_OFF_POWER_STATE=1

###############################################################################
# Default poll duration (in ms)
#  The default is 500ms if not set (see nfc_target.h)
#NFA_DM_DISC_DURATION_POLL=333

###############################################################################
# Force tag polling for the following technology(s).
# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h.
# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B |
#            NFA_TECHNOLOGY_MASK_F | NFA_TECHNOLOGY_MASK_ISO15693 |
#            NFA_TECHNOLOGY_MASK_B_PRIME | NFA_TECHNOLOGY_MASK_KOVIO |
#            NFA_TECHNOLOGY_MASK_A_ACTIVE | NFA_TECHNOLOGY_MASK_F_ACTIVE.
#
# Notable bits:
# NFA_TECHNOLOGY_MASK_A             0x01    /* NFC Technology A             */
# NFA_TECHNOLOGY_MASK_B             0x02    /* NFC Technology B             */
# NFA_TECHNOLOGY_MASK_F             0x04    /* NFC Technology F             */
# NFA_TECHNOLOGY_MASK_ISO15693	    0x08    /* Proprietary Technology       */
# NFA_TECHNOLOGY_MASK_KOVIO	    0x20    /* Proprietary Technology       */
# NFA_TECHNOLOGY_MASK_A_ACTIVE      0x40    /* NFC Technology A active mode */
# NFA_TECHNOLOGY_MASK_F_ACTIVE      0x80    /* NFC Technology F active mode */
POLLING_TECH_MASK=0xEF

###############################################################################
# Force P2P to only listen for the following technology(s).
# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h.
# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_F |
#            NFA_TECHNOLOGY_MASK_A_ACTIVE | NFA_TECHNOLOGY_MASK_F_ACTIVE
#
# Notable bits:
# NFA_TECHNOLOGY_MASK_A	            0x01    /* NFC Technology A             */
# NFA_TECHNOLOGY_MASK_F	            0x04    /* NFC Technology F             */
# NFA_TECHNOLOGY_MASK_A_ACTIVE      0x40    /* NFC Technology A active mode */
# NFA_TECHNOLOGY_MASK_F_ACTIVE      0x80    /* NFC Technology F active mode */
P2P_LISTEN_TECH_MASK=0xC4

PRESERVE_STORAGE=0x01

###############################################################################
# Deactivate notification wait time out in seconds used in ETSI Reader mode
# 0 - Infinite wait
NFA_DM_DISC_NTF_TIMEOUT=0

###############################################################################
# AID_MATCHING constants
# AID_MATCHING_EXACT_ONLY 0x00
# AID_MATCHING_EXACT_OR_PREFIX 0x01
# AID_MATCHING_PREFIX_ONLY 0x02
AID_MATCHING_MODE=0x01

###############################################################################